COLORESCIENCE Mineral Sunscreen Brush SPF 50 Bronze

How to use

Apply generously and evenly in circular motions prior to sun and environmental exposure. Wear alone all over for a subtle to buildable glow and full protection. Or use as a highlighter by applying to high points of the face. In this case, ensure full SPF protection by using another Total Protection™ product applied all over first.

OPEN: Remove brush cap, pull back the sleeve, and remove and discard the rubber band. Put cap back on.

ACTIVATE: With the cap still on, hold the brush with cap facing down and tap 3-5 times on a hard surface. Put some power behind those taps! Then remove the cap and run your finger through the bristles to ensure powder is flowing. Repeat tapping if needed, until you see a small puff of powder in the air when running your finger through the bristles.

APPLY: Using small circular motions, sweep directly onto dry bare skin, moisturized skin, or over makeup. Apply generously across your face for at least 60 seconds while making multiple passes. Don’t forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application. If applying directly over a moisturizer, primer or liquid foundation, ensure products have fully set before applying Sunforgettable®. Reapply at least every two hours for continued protection.

60-day supply based on typical use.